Happy New Year Circle Seal SVG

About this design

A traditional round seal for the year’s biggest night. HAPPY NEW YEAR curves across the top in elegant geometric capitals and CHEERS & CELEBRATE runs along the bottom, upright and readable from left to right. A thick and a thin ring frame the lettering, another ring closes off the center, and a large firework burst with round sparks fills the middle. Two small stars mark the gaps between the lines.

The letters are spaced generously around the curve, so each one stays distinct even where curved text crowds.

Color layers

The color file is built in three layers:

• Backing in navy: one solid disc cut to the outer edge
• Design in cream: the rings and all the lettering
• Accents in gold: the firework and the two side stars

Pieces and cutting

The solid file has 62 pieces and 11 cut-outs. Most pieces are the individual capitals and the sparks of the firework. The small lettering along the bottom needs room, so it passes our cut checks from about 9 inches wide. For smaller items such as coasters, stickers or envelope seals, print it and cut around it.

Projects

• Round door signs for the front porch.
• Serving trays in permanent vinyl.
• Large shirts and sweatshirts at 9 to 11 inches.
• Printed stickers and seals for invitations.
• Cake boards at large sizes.

Step by step: a layered door round

1. Paint a 14 inch wood round navy, or cut the backing layer from navy vinyl.
2. Set the design to 13 inches and download the color file.
3. Cut the design layer from cream vinyl and the accents from gold.
4. Apply the cream layer with transfer tape, centered on the round.
5. Add the gold firework and stars last, lining them up with the gaps in the cream layer.

Size guide

Color ideas

• Gold and white on black
• Silver on navy for a frosty night
• Cream and gold on navy, as shown

Getting the circle straight

Round designs are easiest to center with a little preparation. Fold your shirt, tote or board in half both ways and press lightly to mark the middle, then line up the firework with that point. Keep the design on the transfer tape in one piece; the curved lettering holds its spacing best when it is applied all at once.

Pairs well with

The Merry Christmas Circle Seal is its Christmas twin, and the Cheers to 2027 Seal adds the year and a toast.